lounge lizard says:

so here is the switch box.





it is wired for two lights right now but it will have six when it is all done. the two bottom switches are for front and back lights. so when you have to back up you just flip the switches and rear lights come on. and when you go forward again. you just flip the switches.

the top outside switches are for the show lights witch are the green lights.

the box has a 10 amp circuit breaker right under the power cord and for now is wired to a cigerate lighter plug. only running two lights. and I still have to mark the plugs left and right. so you know what light you are turning on in the truck.

lounge lizard says:



I don't know if I posted this but here it is all in working order. I have two more coming in the mail from a friend who had two broken ones. I just need some parts to make two more and if enough parts come in the mail I might be able to build four more.

expeditionman says:

hey, George, what's all that white crap on the ground?

lounge lizard says:

you miss that don't you jeff?
come on! admit it you love that white stuff!

lounge lizard says:

now I have another part to the project.



time to get the second set done!

lounge lizard says:

started modifying the lights today.




put the hole in for the wiring outlet and I cleaned then for painting

Steve G says:

A really good looking Project. I have a couple lights I need to put on my truck but want to put them behind the grill.

lounge lizard says:

that is where they put alot of the lights on the f-150's but I don't have a stock grille.

Steve G says:

I was even thinking of cutting two holes in the Honeycomb grill. But then if I really didn't like it I would have to get another grill.

lounge lizard says:

that is the down side. but most of the guys say they shine right through so I would mount them and see how you like it before cutting anything.

I was going to spray the housings this weekend. but with the pending weather now I'm not sure. I'm spraying them with bed liner material. wanna try it and see how it turns out.